PET Tube Embryo Custom

Home / Product / Sprayer Bottle / PET Tube Embryo

Aobang Sprayer
of Introduction

Ningbo Aobang Sprayer Co.,Ltd.

since 1999

Ningbo Aobang Sprayer Co.,Ltd.

Ningbo Aobang Sprayer Co., Ltd. ( Yuyao Yunda Sprayer Co., Ltd ) was founded in 1999, which is a professional China PET Tube Embryo Suppliers and wholesale PET Tube Embryo factory. It has accumulated a wealth of research and development experience. And the products are widely used by many major domestic comsmetics company and medicine enterprise and are also exported to the united states,France and Korea,and many other countries and regions,receiving keen appreciations from the customers.we own import一export Authority.

Our company attaches importance to the application of high and new technology, focus on the independent research and development of new technology, new process, committed to providing good products for our customers. We have an engineering technology center, an independent R&D site, and perfect R&D testing equipment, which can meet the daily R&D needs. Through the development of technological innovation activities, we have so far obtained 3 authorized invention patents and 1 utility model patent.

  • 0
    + years
  • 0
    +
  • 0
    + persons
  • 0
    + million

Certification & Patents

Latest news

What are the environmental advantages of recyclable plastic caps?

1. Resource saving: One of the benefits of recyclable plastic caps is their green use of sources. Th...

Learn More

Why Is Airless Technology Important in Treatment Pump Mechanisms?

1.Product Preservation: Airless technology serves as a father or mother of skincare products via pre...

Learn More

What Factors Define the Ideal Fine Mist Sprayer for Cosmetics?

1.Particle Size Consistency: The consistency of particle size in a first-rate mist sprayer for cosme...

Learn More

How Do Treatment Pumps Ensure Precise Dispensing of Skincare Products?

1.Metered Dosage: Treatment pumps are meticulously crafted to provide a metered dosage system, ensur...

Learn More

How Does the Fine Mist Sprayer Prevent Clogging or Blockages?

1. Filtration Systems: Fine mist sprayers are regularly prepared with filtration systems strategical...

Learn More

What Are the Advantages of Using a 15ml Airless Bottle for Skincare Products?

1.Preservation of Product Freshness: The airless mechanism of a 15ml bottle serves as an effective b...

Learn More

What Are the Manufacturing Differences Between Smooth and Ribbed Lotion Pumps?

1.Molding Techniques: The production system for clean lotion pumps normally involves injection moldi...

Learn More

What are the advantages of Plastic PP 20/410 mini trigger with clip compared to other similar products?

1. Material blessings: Plastic PP (polypropylene), as the primary cloth, is light-weight, durable an...

Learn More

PET Tube Embryo Industry Knowledge Extension

Causes and solutions of defects in the production process of PET tube embryo
In recent years, social and economic development has become more and more rapid, and PET tube embryos have been used more and more in daily life. When we produce tube blank products, we will encounter various defects in the products produced. What should we do? To solve these problems? Jiaoxiang has been engaged in the plastic mold industry for many years, and has its own set of concepts for the manufacture of PET tube embryo molds, and a set of analysis routines and solutions for tube blank product defects.
1. Blistering in the wall of the tube blank is a common problem of tube blank products. It is mainly produced in the middle part of the tube blank. The main reason is that the back pressure is not enough or the exhaust hole is blocked. Solution: If the reason is insufficient back pressure, you can increase the injection pressure. If the vent is clogged, clean the mold vent.
2. Bubble rupture in the preform wall (fork-like, ear-like, fish-bone-like), such phenomena are generally caused by too fast decompression, too long injection molding stroke, too high mold heating temperature and other reasons. Solution: It can be solved by increasing the decompression cycle, reducing the decompression stroke, and reducing the mold heating temperature.
3. The parting line shrinks and voids. This kind of phenomenon occurs on the parting line, which is caused by insufficient injection volume at one time. Solution: The injection volume can be appropriately increased.
4. The preforms are bonded and deformed because the preforms are too hot and the mold is not cooled enough. Solution: At this time, check whether the mold cooling system is faulty. If the cooling system is ok, you can increase the production time or increase the cooling time.

What are the elements of PET tube embryo molding?
1. Plastic processing
Since PET macromolecules contain lipid groups and have a certain degree of hydrophilicity, pellets are sensitive to water at high temperatures. When the moisture content exceeds the limit, the molecular weight of PET decreases during processing, and the product becomes colored and brittle. Generally, the proportion of PET tube embryo recycled materials should not exceed 25%, and the recycled materials should be thoroughly dried.
2. Selection of injection molding machine
Due to the short stable time of PET after the melting point and the high melting point, it is necessary to use an injection system with more temperature control sections and less self-friction heat generation during plasticization, and the actual weight of the product (water-containing material) should not be less than machine injection. 2/3 of the amount.
3. Residence time
Do not use too long residence time to prevent the decrease of molecular weight, and try to avoid the temperature above 300°C. If the stoppage is less than 15 minutes, it only needs to be treated with air injection; if it is more than 15 minutes, it should be cleaned with viscosity PE, and the temperature of the barrel should be lowered to the PE temperature until it is turned on again.
4. Mold and gate design
PET tube embryo is generally molded with hot runner molds. It is better to have a heat shield between the mold and the template of the injection molding machine. Its thickness is about 12mm, and the heat shield must be able to withstand high pressure. The exhaust must be sufficient to avoid local overheating or fragmentation, but the depth of the exhaust port should generally not exceed 0.03mm, otherwise flashing will easily occur.

Contact Us

*We respect your confidentiality and all information are protected.